NEXUS Armour Soft Armor NIJ3A for Warrior-A.S. DCS, RICAS and Raptor Plate Carrier - CHK-SHIELD | Outdoor Army - Tactical Gear Shop

NEXUS Armour Soft Armor NIJ3A for Warrior-A.S. DCS, RICAS and Raptor Plate Carrier

NEXUS Armour Soft Armor NIJ3A for Warrior-A.S. DCS, RICAS and Raptor Plate Carrier

We want to introduce some very common and high-quality soft armor inserts manufactured by the UK company (production is in the UK) Nexus Armour. They were one of the first company´s in Europe that produced fitting inserts for the famous Warrior-A.S. plate carriers. #Ad

Protection NIJ IIIA & IV for Nexus Products:

IIIA

Ammunition / max Velocity in m/s / Shots fired without Penetration

  • 9mm FMJ RN / 436 m/s / 6 Shots
  • .357 / 448 m/s / 6 Shots
  • SIG.44 Mag SJHP / 436 m/s / 6 Shots

IV

Ammunition / max Velocity in m/s / Shots fired without Penetration

  • .30 Kaliber M2 AP / 878 m/s / 1 Shot

WARRIOR Elite Ops DCS Soft Armor NIJIIIA by NEXUS

The Nexus Armour Soft Armor for Warrior-A.S. DCS Plate Carrier consists of 2 inserts for front and back and also two smaller side panel inserts for left and right. The soft armor covers the NIJ3A level and protects against different handgun projectiles and splinters with a velocity up to 630 m/s. Therefore it can protect against for example 9x18 and 9x19 mm ammunition. For the protection level-NIJ4, additional hard armor is needed.

Side Panel Dimensions:

  • Sides: ca. 10.63 x 5.91 inch (27 x 15 cm)

NEXUS Armour Soft Armor DCS NIJ3A

The inserts are fitting also in:

75TACTICAL SIGMA200 Plate Carrier

WARRIOR Elite Ops RICAS Soft Armor NIJIIIA NEXUS

The Nexus Armour Soft Armor for Warrior-A.S. RICAS Plate Carrier consists of 2 inserts for front and back, and also two smaller side panel inserts for left and right. The soft armor covers the NIJ3A level and protects against different handgun projectiles and splinters with a velocity up to 630 m/s. Therefore it can protect against for example 9x18 and 9x19 mm ammunition. For the protection level, NIJ4 additional hard armor is needed.

Side Panel Dimensions:

  • Sides: 10.63 x 5.91 inch (27 x 15 cm)

Therefore the side panels are also suited for the Warrior-A.S. DCS plate carrier

NEXUS Armour Soft Armor RICAS NIJ3A

WARRIOR Elite Ops RAPTOR Soft Armor NIJIIIA NEXUS

The Nexus Armour Soft Armor for the Warrior-A.S. Raptor Plate Carrier consists of two inserts for front and back. The inserts cover due to their cut and dimensions also the sides of the wearer effectively. The soft armor covers the NIJ3A level and protects against different handgun projectiles and splinters with a velocity up to 630 m/s. Therefore it can protect against for example 9x18 and 9x19 mm ammunition. For the protection level, NIJ4 additional hard armor is needed. The Raptor inserts are available like the Raptor plate carrier in two sizes: M and L.

Dimensions:

Size M:

Front:

  • Upper edge : 11.02 inch (28 cm)
  • Lower edge : 24.41 inch (62 cm)
  • High total: 16.14 inch (41 cm)
  • High side edge: 7.48 inch (19 cm)

    Back:

    • Upper edge: 11.81 inch (30 cm)
    • Lower edge: 22.05 (56 cm)
    • High total: 19.29 inch (49 cm)
    • High side edge: 7.48 inch (19 cm)

      Size L:

      Front:

      • Upper edge: 12.2 inch (31 cm)
      • Lower edge: 24.41 inch (62 cm)
      • High total: 17.72 inch (45 cm)
      • High side edge: 8.27 inch (21 cm)

        Back:

        • Upper edge: 13 inch (33 cm)
        • Lower edge: 23.62 (60 cm)
        • High total: 21.26 (54 cm)
        • High side edge: 8.66 (22 cm)
          NEXUS Armour Soft Armor RAPTOR NIJ3A

          Soft Armor NIJIIIA WARRIOR Elite Ops Fragbelt Inlay NIJ3A NEXUS

          The Nexus Armour Soft Armor for the Warrior-A.S.Frag Belt consists of one insert. The soft armor covers the NIJ3A level and protects against different handgun projectiles and splinters with a velocity up to 630 m/s. Therefore it can protect against for example 9x18 and 9x19 mm ammunition.

          Details:

          • Dimensions: 32.68 x 5.71 inch (83 x 14,5 cm)
          • Weight: 1.25 lbs (565 g)

          NEXUS Armour Soft Armor Frag Belt NIJ3A Full

          Soft Armor NIJIIIA WARRIOR Elite Ops Drop Down Pouch Inlay NIJ3A NEXUS

          The Nexus Armour Soft Armor for the Warrior-A.S.Drop Down Utility Pouch consists of one insert. The soft armor covers the NIJ3A level and protects against different handgun projectiles and splinters with a velocity up to 630 m/s. Therefore it can protect against for example 9x18 and 9x19 mm ammunition.

          NEXUS Armour Soft Armor Drop Down Utility Pouch NIJ3A Detail

          Details:

          • Dimensions: 8.66 x 5.91 inch (22 x 15 cm)
          • Weight: 0.35 lbs (160 g)

          Nexus Armour

          Leave a comment

          Please note: comments must be approved before they are published.