General
The RAPTOR plate carrier Bundle M from WARRIOR Assault System was developed with the input of Special Forces units and is based on the US-SPEAR cut. The plate carrier has excellent armor coverage while allowing all important movement and mobility.
Details:
- for ballistic inserts
- Front and back pockets for hard ballistic plates (dimensions 30 x 25cm)
- great freedom of movement
- Front and back quick release system
- simple and flexible size adjustment
- double-sided quick release system in the shoulder area
- Modular loops for pouches in the Nato standard 25 mm
- Velcro surface in the chest area
- split velcro front opening
- Rescue handle
- 2 pockets (17x22 cm) for SK4 protection plates can be attached to the side with hook-and-loop (not included)
- only the versions explicitly referred to as G36 bundle are suitable for G36,
- 5.56mm bundle (M4 and open-M4) are not suitable for G36 magazines
- Material: 100% 500D Cordura, all straps after US Mil Spec
- materials used have the lowest infrared values (99.8%) and are produced according to military specification
Delivered Items:
- 1 x Plate Carrier (Size M)
- 1 x Large Admin Pouch
- 2 x Utility Pouch Small
- The appearance of the pouches may vary depending on the magazine type
- Magazine pouches for a total of 5 magazines can be put together from single, double and triple magazine pouches
| Size |
M |
| Height |
40 - 50 cm
16 - 20 Inches
|
| Girth |
86 - 107 cm
34 - 42 Inches
|
| Chest |
97 - 109 cm
38 - 43 Inches
|
Protection:
The plate carrier itself does not provide ballistic protection. It can accommodate the original WARRIOR NIJIIIA soft ballistics for the RAPTOR plate carrier from NEXUS. For protection class NIJIV / SK4 additional protection plates are required, these are not included.
All SK4 / NIJIV (standalone) plates with the dimensions 25 cm x 30 cm (10 x 12 inches) fit
Matching inserts:
Size M:
- DCS inserts (manufacturer: GARED / NEXUS) Yes: front / back No: sides
- RAPTOR M Inserts manufacturer: GARED / NEXUS
- Plate carrier Softballistics SK1 Manufacturer: BATEX Yes: in the plate pocket
- SK1 Insert Manufacturer: BATEX
- SK4 10 x 12 inch protection plates
